型号Model | QJM5200THB33-4M |
项目 | 单位 | 值 |
泵送系统Pumping system | 最大理论输送量(高压/低压)Max. Theor. output(high/low pressure) | m3/h | 55/80 |
混凝土最大出口压力(高压/低压)Max. Theor. concrete output Pressure(high/low pressure) | MPa | 13/7.5 |
额定工作压力 Rated working pressure | MPa | 32 |
泵送频率(高压/低压) Pumping frequency(high/low pressure) | min-1 | 18/30 |
料斗容积 Hopper capacity | L | 450 |
上料高度 Filling height | mm | 1450 |
液压系统型式 Hydraulic system type | | 开式 Open loop |
分配阀形式Distribution valve | | S管阀 S valve |
油缸缸径×行程 Oil cylinder dia.×stroke | mm | φ100×1650/1400 |
混凝土缸径×行程Concrete cylinder dia.×stroke | mm | φ200×1650/1400 |
液压油冷却Hydraulic oil cooling | | 风冷Air cooling |
推荐塌落度 Recommended concrete slump | cm | 12~23 |
最大骨料尺寸 Max. aggregate dimension | mm | 40 |
臂架Placing boom | 结构形式 Structure type | | 33-4M |
最大布料高度 Placing depth | m | 33 |
最大布料半径 Horizontal distance | m | 33 |
最大布料深度 Placing depth | m | 22.4 |
回转角度Slewing angle | | 365° |
输送管直径 Pipe diameter | mm | 125 |
末端软管长度End hose length | mm | 3000 |
臂架最小打开高度Min. height of opening placing boom | mm | 11900 |
支腿跨距（前×后×纵向）Outriggers span (front×rear×side) | mm | 6140×7098×6706 |
底盘及整车Chassis and the whole machine | 底盘型号Chassis model | | ZZ5207N5617D1 |
轴距 Wheelbase | mm | 5600 |
发动机型号Engine type | | D10.34-40 |
发动机额定功率Engine power | kW | 249kw |
燃油箱容积Oil tank cubage | L | 400 |
尾气排放标准Tail gas exhaust standard | | 国IV |
整车外形尺寸(长×宽×高) Overall dimensions | mm | 10750x2480x3648 |
其它Others | 润滑方式Lubrication mode | | 手动液压两用同步润滑泵 |
液压油箱容积 Oil tank volume | L | 500 |
控制方式Control mode | | 手动+遥控Manual＋remote control |
压力水箱最大压力 Maximum water pressure | MPa | 0.8 |
水箱容量 Water tank volume | L | 400 |
混凝土管清洗方式Pipe cleaning mode | | 水洗/干洗Water cleaning/dry cleaning |